Maharashtra

Industrial rooftop solar in Mumbai and Palghar

7 plants in five towns of the Mumbai region, from 104 kWp to 926 kWp, most of them on metal sheet roofs.

projects listed here in Mumbai and Palghar
7
places with a plant
5
industries named
2
most recent commissioning
Jul 2026

The industrial belt

Mumbai, Thane and Palghar districts

The five towns sit in three districts, all inside or beside the Mumbai Metropolitan Region, which covers about 4,355 km² and takes in Greater Mumbai plus parts of Thane, Palghar and Raigad. Mumbai lies on a peninsula bordered by the Arabian Sea. Palghar town stands 7 m above sea level and became the headquarters of its own district in 2014.

Bhiwandi and Murbad are in Thane district. Bhiwandi, about 20 km northeast of Mumbai, has the second-largest power-loom cluster in India after Surat and has grown into a warehousing and logistics hub. Murbad is an industrial town near the Sahyadri hills. Boisar, in Palghar district, is described as one of its largest industrial towns, with more than 1,500 units in chemicals, pharmaceuticals, textiles and mechanical work, and the MIDC's Tarapur estates nearby host bulk-drug and specialty-chemical makers.

Rain is the common thread. Annual totals run from about 2,200 mm in Mumbai city to about 2,600 mm in Bhiwandi, nearly all of it from June to September with July the wettest, and evening humidity peaks at about 81 to 85 percent in July and August. The dry months are hot too: Murbad has recorded 45.5 °C.

Sources: Mumbai (opens in a new tab), Palghar (opens in a new tab), Boisar (opens in a new tab), Tarapur (opens in a new tab), Bhiwandi (opens in a new tab), Murbad (opens in a new tab). As of Nov 2026.

Our plants here

Seven plants, five on metal sheet, one PPA

7 plants listed here, from 104 kWp to 926 kWp, commissioned between 2023 and 2026. Roof type is recorded for 7 of them: 7 on metal sheet roofs. Packaging and printing is the largest named sector (3 of 7 projects), ahead of glass and ceramics.

6 were CAPEX and 1 was PPA / OPEX. The PPA plant, at Boisar, is also the oldest and the smallest on this page. The two Mumbai entries are one in Dadar and one listed under the city name.

Metal sheet in this much rain and sea air puts the weight on details. Ask what corrosion protection the structure and fasteners carry, how every roof penetration is flashed, and who inspects those joints after the first monsoon.

What to check first

Rain, rust and small roofs: checks for the Mumbai region

  1. 01

    Corrosion protection

    Ask for the coating on the mounting structure and the fastener material, and what the maker warrants for a coastal site.

    Metal sheet roof solar
  2. 02

    Wet-season yield

    Ask for the June to September estimate on its own. An annual figure averages the rain months away.

    Guide: performance ratio
  3. 03

    Roof smaller than the load

    If the roof cannot cover your consumption, ask what offsite solar could add on top.

    Open access solar
  4. 04

    A PPA in a shared building

    Where several units share one structure, a PPA needs the building owner's consent. Raise it before the proposal, not after.

    Solar PPA for factories
  5. 05

    Rules for your connection

    Maharashtra's metering and surplus terms move over time. Read the current position before you size.

    Maharashtra solar policy

Common questions

What Mumbai and Palghar factories ask before they buy

Speak with an industrial solar engineer
Is the Mumbai plant listed here inside the city?

Two entries are listed for Mumbai: one in Dadar and one under the city name. Both are on metal sheet roofs, and neither is tied to an estate.

Do you build in the Tarapur estates near Boisar?

The Boisar plant on this page is listed by town, so it is not attached to an estate. For Tarapur or Boisar, send your town and average monthly bill and the free 7-day feasibility study starts there.

How much does the monsoon cut output in this belt?

Output falls in the wet months because cloud cuts the sunlight reaching the modules. How far depends on the site, so ask for a month-by-month estimate rather than an annual total.

Can you solarise a warehouse in Bhiwandi?

The Bhiwandi plant listed here is a packaging and printing factory. Warehouses and logistics buildings have their own page, and the same free study applies to them.

Solar for warehouses and cold storage

Were these plants CAPEX or PPA?

Among the plants we built here, 6 were CAPEX and 1 was PPA / OPEX. The financing pages compare the two.

Compare CAPEX and PPA for your factory

Is there an Adhvanik engineer near my factory in Mumbai and Palghar?

Our head office is in Mumbai. Send your town and an average monthly bill, and an engineer replies within 48 hours; the free 7-day feasibility study starts from those two details.

Speak with an industrial solar engineer

Free feasibility study

Factory in the Mumbai region? Send your roof type and bill

The feasibility study is free, takes 7 days and carries no commitment. An engineer replies within 48 hours.

What the study covers

  • Financial ROI sheet based on a preliminary design
  • Policy check for your state and connection
  • Roof feasibility and the area available for installation
Call us+91 22 4618 3484Get a free feasibility study