Project · Maharashtra

Baramati Cattlefeeds – Baramati: 771 kWp metal sheet rooftop solar in Maharashtra

Generating since Jul 2026. Baramati Cattlefeeds bought the plant under CAPEX and owns it. It is one of 3 Baramati Cattlefeeds plants on our project list.

771 kWp metal sheet rooftop plant at Baramati Cattlefeeds in Baramati, Maharashtra
Capacity
771 kWp
Installation
Metal sheet roof
Location
Baramati, Maharashtra
Finance model
CAPEX

This plant at a glance

Client
Baramati Cattlefeeds
Capacity
771 kWp (DC), with 600 kW (AC) of inverters
Service
EPC + O&M
Commissioned
Jul 2026
Status
Operational. Built and maintained by Adhvanik Energy; owned by the client.

771 kWp puts the plant in the larger group on the list, usually with several inverters sharing the load. The array is 29% larger than the inverters, a DC/AC ratio of 1.29.

The Baramati Cattlefeeds plant has been running only since Jul 2026. The early question is whether output matches the design. Its first weeks, in Jul 2026, were monsoon weeks.

Closest in capacity on the list: DP Cocoa – Varadaiahpalem (759 kWp, Andhra Pradesh). Ozpure – Maharashtra (867 kWp) and Baramati Cattlefeeds – Shrirampur (578 kWp) were also commissioned in Jul 2026. In Maharashtra, in order of commissioning, FUSO Glass – Murbad comes before it and Exotic Fruits – Nashik after.

Engineering

What a metal sheet rooftop plant involves

A shed roof in Baramati gives a 771 kWp plant plenty of room, but it asks more of the structure than a slab does. Sheet profile, purlin spacing and design wind speed decide how the rails are fixed, and the fixing has to leave the sheet watertight.

Before modules go on a sheet roof like the one at Baramati Cattlefeeds – Baramati, the roof assessment covers sheet age and corrosion and any turbo ventilators or skylights, and a structural engineer confirms the purlins. A leaking bay is re-sheeted first, because lifting modules off a roof later costs more than doing the job beforehand.

On Asset Connect, a 771 kWp plant is read month on month: generation, irradiance and fault alerts, with performance ratio showing whether soiling or a fault is costing units.

Finance model

How the plant is paid for

CAPEX is the model where the client buys the plant. For this Baramati plant, that means the 771 kWp system is the client's property since Jul 2026, with the savings and the upkeep decisions on the client's side.

A finance head weighing CAPEX against a PPA asks how much capital to commit, how long the plant will run and who will look after it.

Baramati

Where Baramati Cattlefeeds – Baramati sits on our list

Solar resource here
1,963 kWh/m² a yearAbout 1,616 kWh per kWp a year for a standard tilted system; July is the weakest month. Global Solar Atlas estimate for Baramati; a roof plant at roof tilt differs.
Capacity range
500 to 1,000 kWp771 kWp here. 38 plants on our list are in this range.
Type of installation
Metal sheet roofThe most common factory roof.
Finance option
CAPEXThe factory owns the plant from day one.

The list has one plant in Baramati, and this is it.

Baramati is covered on the page for Baramati and Shrirampur, which lists 3 plants.

Maharashtra has 44 projects on the list, across 17 towns. By roof, 40 on metal sheet roofs, 1 on Carport, 1 on Carport + RCC, 1 on ground mount and 1 on RCC.

Projects

Related plants

Elsewhere in Maharashtra

Other plants on metal sheet roofs

Common questions

The Baramati Cattlefeeds – Baramati plant: questions and answers

How big is the Baramati Cattlefeeds – Baramati plant?

Two figures describe the plant: 771 kWp on the module side and 600 kW (AC) on the inverter side. As a ratio that is 1.29: the array is rated above the inverters, which cap what the plant can feed the site at any moment.

How is the plant at Baramati mounted?

Metal sheet, per the list. On a roof like that the mounting is chosen per roof, and sheet condition is checked before any module goes on.

Does Adhvanik Energy work near Baramati?

Yes. One plant is listed for Baramati, among 44 in Maharashtra. The free 7-day feasibility study needs only your town and a typical monthly bill.

Free feasibility study

Find out what your sheds can carry

Tell us the roof type and last year's bills. An engineer gets back within 48 hours. The 7-day feasibility study costs nothing.

Call us+91 22 4618 3484Get a free feasibility study