Gujarat

Industrial rooftop solar in Vadodara, Sanand and Jhagadia

Three towns in three districts and 3 plants: 2 we built in 2026, and a 1,200 kWp plant at Jhagadia that we maintain for another builder.

projects listed here in Vadodara, Sanand and Jhagadia
3
places with a plant
3
industry named
1
most recent commissioning
Sep 2026

The industrial belt

Three towns, three districts

Vadodara, Sanand and Jhagadia are in different districts and have different industrial characters, so this page reads best town by town. Vadodara is a city of process and heavy engineering: Indian Oil's Gujarat Refinery and the former IPCL complex (now Reliance) lie around it, Savli hosts a rail-coach plant, Tata Advanced Systems builds C-295 transport aircraft in the city, and it is a major pharma hub.

Sanand, in Ahmedabad district, is described as a major industrial hub of western India. GIDC has acquired about 5,000 acres in and around it for future industry, Tata Motors' Nano plant rolled out its first cars there in June 2010, and Hitachi and GE Power equipment plants are on site. Jhagadia is a taluka of Bharuch district, about 3 km south of the Narmada, with a GIDC estate whose listed companies include Abbott, Saint-Gobain, PepsiCo and Aarti Industries.

Heat is shared by all three. Vadodara averages a 39 °C maximum from March to July, has recorded 48.0 °C (19 May 2016) and gets about 950 mm of rain a year. Jhagadia's average summer temperature is 43 °C. Vadodara also sits on the Vishwamitri, which flooded in 2005 and 2008.

Sources: Vadodara (opens in a new tab), Sanand (opens in a new tab), Zhagadia (Jhagadia) (opens in a new tab). As of Nov 2026.

Our plants here

Two plants we built, one we maintain

3 plants listed here. We built the two commissioned in 2026: Vadodara (450 kWp, metal sheet roof) and Sanand (519 kWp, electrical and electronics, roof type not recorded), both on a CAPEX basis. At Jhagadia we look after a 1,200 kWp plant that someone else built, and it is the largest of the three.

Taking over maintenance of a plant like that starts with paperwork: twelve months of inverter logs, the single-line diagram and the module and inverter makes. The AMC page lists what we need before we quote.

Flood history is the local fact that bears most on layout. The array on a roof stays dry, but inverter rooms and cable trenches on a low plot do not. Ask where the inverter room sits against the highest water level recorded on your plot.

What to check first

Heat, floods and a plant you did not build

  1. 01

    Summer derating

    Ask what module temperature the estimate assumes for April and May, when Vadodara and Jhagadia run hottest.

    Guide: performance ratio
  2. 02

    Inverter room above flood level

    Put the inverters and the metering room where water has not reached, and ask how cables are routed to them.

    Solar O&M and AMC
  3. 03

    Handing over an existing plant

    If another contractor built your plant, ask who owns the performance ratio before you agree a maintenance scope.

    AMC for existing plants
  4. 04

    Process load beyond the roof

    A large plant can outgrow its roof. Ask what open access could add and how it would be contracted.

    Open access solar
  5. 05

    Rules for your connection

    Gujarat's metering and surplus terms are revised from time to time. Check the current position first.

    Gujarat solar policy

Common questions

What Vadodara, Sanand and Jhagadia factories ask before they buy

Speak with an industrial solar engineer
Do you build in Savli, the Sanand GIDC estates or Jhagadia GIDC?

Our plants are listed by town, so none is tied to an estate. For a factory in any of those, send your town and average monthly bill; the free 7-day feasibility study starts from those two things.

You maintain a Jhagadia plant you did not build. Can you do that for mine?

Yes. 1 plant on this page is maintained for another builder. Send the plant's capacity, make and location, and the AMC page explains what we need to quote.

Get an O&M assessment

Does Vadodara's flood history affect a rooftop plant?

The roof array sits above the water. The exposure is at ground level: the inverter room, switchgear and cable runs. We ask where they will sit before we fix the layout.

Which finance models were used here?

Of the plants we built, 2 were CAPEX. The financing pages compare the two.

Compare CAPEX and PPA for your factory

Who covers Vadodara, Sanand and Jhagadia for site visits and enquiries?

Our corporate and technical office is in Ahmedabad. Whatever your town, the first step is the same: your location and a recent electricity bill. An engineer replies within 48 hours.

Speak with an industrial solar engineer

Free feasibility study

Plant in Vadodara, Sanand or Jhagadia? Send the bill

The feasibility study is free, takes 7 days and carries no commitment. An engineer replies within 48 hours.

What the study covers

  • Financial ROI sheet based on a preliminary design
  • Policy check for your state and connection
  • Roof feasibility and the area available for installation
Call us+91 22 4618 3484Get a free feasibility study