Your power bill

ToD (time-of-day) tariff

A time-of-day (ToD) tariff charges a different price for electricity depending on when you use it: cheaper in the state's solar hours and dearer in its peak hours.

What the 2023 rules require

The Electricity (Rights of Consumers) Amendment Rules, 2023 require ToD tariffs for industrial and commercial consumers with a maximum demand above 10 kW from no later than 1 April 2024, and for most other consumers, except agriculture, from 1 April 2025. In the eight solar hours of the day that the state commission specifies, the tariff must be at least 20% below the normal tariff. In peak hours it must be at least 1.20 times the normal tariff for industrial and commercial consumers. Peak hours cannot be longer than the solar hours. The ToD rates apply to the energy charge component. Rules as of Nov 2026.

What it means for rooftop savings

Most rooftop generation falls in the state's solar hours, when ToD grid power is cheapest. Each solar unit replaces a solar-hour grid unit, so the saving per unit is measured against the discounted rate, not the normal tariff. A proposal that values every solar unit at your average tariff will overstate the saving. Solar still pays, so run the numbers on your ToD slots.

Where batteries and scheduling come in

Peak-hour power now costs more, which makes it worth moving consumption out of the peak. Energy-hungry processes can be scheduled into solar hours, and a battery can store solar or off-peak power and discharge it during the peak. The wider the gap between solar-hour and peak rates in your state, the stronger the case.

Illustrative example

Worked example: one unit, three prices

A factory whose normal energy charge is ₹8.00 per kWh, in a state applying the minimum ToD rules.

Solar hours (at least 20% less)
₹6.40 per kWh
Normal hours
₹8.00 per kWh
Peak hours (at least 1.20 ×)
₹9.60 per kWh

A solar unit used at noon saves ₹6.40, not ₹8.00. A battery that moves a unit into the peak avoids ₹9.60, less its round-trip losses.

Illustrative numbers. Your state sets the actual slots and rates.

What to check on your ToD slots

  • Your state's solar-hour and peak-hour slots, and the rates in the latest tariff order
  • Whether your bills already show consumption by ToD slot
  • Whether the solar proposal values savings slot by slot
  • How net-metered or banked units are treated across slots

Batteries and your peak hours

Our battery storage work is built for peak shaving and demand-charge reduction, and for firm power. It can move solar or off-peak units into your state's peak hours.

See battery energy storage

Sources

  1. Electricity (Rights of Consumers) Amendment Rules, 2023: text of rule 8A (ToD tariff) (opens in a new tab)
  2. Power Line: MoP notifies Electricity (Rights of Consumers) Amendment Rules, 2023 (opens in a new tab)

Related terms

  • Your power bill

    Peak shaving

    Cutting the highest point of your demand, usually with a battery or load scheduling, to lower the demand charge on your bill and avoid peak-hour tariffs.

  • Equipment & O&M

    BESS

    Battery energy storage system: batteries with their own inverter and controls that store energy and release it later, used in industry mainly to cut peaks and back up critical loads.

  • Your power bill

    Contract demand

    The maximum power, usually in kVA, that a high-tension (high-voltage) consumer agrees with its DISCOM to draw. A share of it sets the floor for demand charges on every monthly bill.

  • Grid & policy

    Behind-the-meter

    A plant connected on your side of the DISCOM's meter, so its power is used directly by your factory and only the shortfall comes from the grid.

Keep reading

Free feasibility study

Ask how ToD slots change your solar case

The feasibility study is free, takes 7 days and carries no commitment. An engineer replies within 48 hours.

What the study covers

  • Financial ROI sheet based on a preliminary design
  • Policy check for your state and connection
  • Roof feasibility and the area available for installation
Call us+91 22 4618 3484Get a free feasibility study