Grid & policy

Banking charges

Banking charges are what a DISCOM charges for "storing" surplus renewable energy you inject into the grid and letting you draw it back later in the settlement period, levied as a share of the energy banked or a per-unit fee depending on the state.

Why banking matters for solar

Solar output peaks at midday and stops at night, and an offsite solar plant keeps generating on your weekly off. Banking lets those units go into the grid when you cannot use them and come back when you can, within the settlement period. Without it, surplus generation is either sold cheaply or lost.

What the green open access rules require

Under the Green Energy Open Access Rules, 2022, banking must be permitted on at least a monthly basis, for at least 30% of the consumer's monthly consumption from the DISCOM, on payment of charges set by the state commission to cover the DISCOM's added costs. Banked energy generally cannot be carried forward from one month to the next. States set the details, including any limits on drawing banked units in peak hours. Rules as of Nov 2026.

How the charge affects your saving

A banking charge taken as a share of energy works like a loss: for every 100 units banked, you get back fewer than 100. Only banked units are charged, so the more of your solar you use as it is generated, the less banking costs you. Sizing an open-access plant to your real consumption pattern keeps the banked share, and its cost, down.

Illustrative example

Worked example: banked units

A factory banks surplus solar during a month with two shutdown weekends.

Units banked in the month
1,00,000 kWh
Banking charge (as a share of energy)
8%
Units available to draw back
92,000 kWh

The 8,000 units retained are the cost of banking that month.

Illustrative numbers. Some states charge banking per unit instead, and the rates differ.

What to check on banking

  • The banking charge in your state, and whether it is a share of energy or a per-unit fee
  • The settlement period, and what happens to units still banked at the end of it
  • Whether banked units can be drawn in peak hours
  • How the proposal you are reviewing estimates the share of energy that will be banked

Banking in our open access designs

We build offsite solar wheeled to your plant, for loads larger than your roof can serve. When we design an open access plant, the banking terms in your state are part of the calculation.

See open access solar

Sources

  1. JMK Research: Green Energy Open Access Rules 2022, summary of provisions (opens in a new tab)

Related terms

  • Grid & policy

    Open access

    The right to buy electricity from a generator other than your DISCOM, such as an offsite solar farm, and have it delivered over the grid for a set of network charges and surcharges.

  • Grid & policy

    Wheeling charges

    What you pay the distribution company for carrying open-access power over its network from the generator to your factory, usually per unit, plus a share of energy lost on the way.

  • Grid & policy

    Net metering

    A bidirectional meter records the units your plant exports and the units you import, and you pay only for the net units consumed in the billing period.

  • Your power bill

    ToD tariff

    Time-of-day tariff: electricity priced by the hour of use, at least 20% cheaper in the state's solar hours and at least 20% dearer in peak hours for industry.

Keep reading

Free feasibility study

Ask how banking would apply to your load

The feasibility study is free, takes 7 days and carries no commitment. An engineer replies within 48 hours.

What the study covers

  • Financial ROI sheet based on a preliminary design
  • Policy check for your state and connection
  • Roof feasibility and the area available for installation
Call us+91 22 4618 3484Get a free feasibility study